No products in the cart.
– July 8, 2021
Works fine, out of the box. The slicer program is not familiar, we need to study.
– July 27, 2021
Comrades!!! excellent printer for your money! In this, who planned to buy a 3D printer, I advise you to pay attention to this model. And it is in the audit v.4, because. Here no driver распаены on board (the replacement). Yes, and compared with the same “летающим bear, Ghost”-which is necessary to bring up “crazy”. In this printer, everything is available from the box, without special concern. I highly recommend it!
– July 27, 2021
Very good 3D Printer. Fast shipping. Thank you.
– August 1, 2021
For the first printer it is an excellent choice.
Unpacked, calibrated the table with paper and can be printed.
The complete PLA plastic falls off the table even on a test cube with a flash drive to print the holder for plastic had to pump.
At high speeds (from standard settings for PLA), the printer tries to escape.
The table is heated not very evenly, the difference between the center and the edges is about 5 degrees.
Inside the printer you can only put a special coil of 0,5 kg and a certain size, but there is a side window through which you can run a plastic thread from a number of standing coils coils coils
The printer is noisy enough, with the fans on the fans only heard them, when printing PET-G plastic, the fans of the blow turned off and the loud motors were heard.
– August 2, 2021
– August 7, 2021
Printer bomb! This is my first 3D printer, I do not have much to compare with, but I got out of the box, 30 minutes drove with the setting (I do not know it quickly or or or Prints well, models from the Internet (the son immediately downloaded the puzzle, and some House) prints without problems. Appearance is excellent. Delivered in 6 days.
– August 29, 2021
Hi who can I Speak to on the item l purchase from you store all of the pieces of my DREAMER NX Machine that I purchase one of the Spool Holder is missing out the box how do I get the Spool Holder so I can use my DREAMER NX PRINTER that I PURCHASE from you store thank you.
– August 31, 2021
Prints not bad, the packing box is badly crumpled, there is minor damage on the case, there is no SD card in the kit.
– September 20, 2021
Delivery to Novosibirsk 3 days. Everything works fine.
– November 12, 2021
The printer is excellent!!! Bought for 26 thousand, now 22, just take it!!)
– November 22, 2021
Quality product, I recommend using for typical plastics and beginners. At home it looks great as a modern device, prints high-quality details, had to get used to it for a couple of days, did not stick to the detail table, it turned out out out out There is a program for children, the child of 7 years figured out the trip. While printing test samples, it turns out very firmly. Of the minuses, wait a long time.
– December 15, 2021
The goods went longer than expected. But I think this is not the seller’s fault, but the transport company. Recommend.
– January 22, 2022
Excellent printer, delivered to the Krasnodar Territory for 4 days from Podolsk, everything works, packed well, the Russian Post did not destroy the printer, came live, thank you very much.
– February 5, 2022
– March 4, 2022
It came quickly, everything is available and whole. In the printer there were 2×0.5 kg of plastic, although I did not see them in the description. The printer works. First Printer, just learning to print.
– March 4, 2022
Все отлично. Принтер пришел быстро. Хорошая упаковка, все цело, не побито. В комплекте 2 катушки пластика по полкило. Да и вообще полный комплект всех болтиков, гаек, отверток, флешка с видео и прочим софтом. Принтер почти собран, нужно только прикрутить голову, не забудьте убрать пластиковые стяжки. Собрал за пол часа (собирал первый раз в жизни). Все завелось, все нормально. Советую!
Only logged in customers who have purchased this product may leave a review.
Creality 3D® Ender-3 3D Printer
Creality 3D® Ender-3 Pro DIY 3D Printer Kit
Creality 3D® UW-01 Washing and Curing Machine
Flashforge DIY 3D Printer Kit Adventurer 3/Lite/3C