OWON SDS1104 Digital Storage Oscilloscope 4 Channels 100MHz 1GSa/s Low Background Noise Deep Memory LCD Display Scopemeter Scope Meter
Features:
1.This is a super-economical type digital storage oscilloscope.
2. The 2-channel oscilloscope has 100MHz bandwidth, 1GS/s smple rate.
3. Ultra-thin body, designed with 7-inch high resolution LCD.
4.Application for electronic circuit debugging, circuit testing, design and manufacture, education and training, automobile maintenance and testing
Specifications:
Performance Characteristics |
Instruction |
|
Sample rate (real time) |
Four CH |
250 MSa/s |
Dual CH* |
500 MSa/s |
|
Single CH |
1 GSa/s |
|
Waveform capture rate |
45,000 wfms/s |
|
Display |
8″ color LCD, TFT display , 800×600 pixels |
|
Channel |
4 |
|
Max record length |
When four channels are turned on, the max record length is 10M; and max 20M for two channels; max 40M for one channel. |
|
Sampling rate / relay time accuracy |
±2.5 ppm max (Ta = +25℃) |
|
Input coupling |
DC, AC, Ground |
|
Input impedance |
1MΩ±2%,in parallel with 15pF±5pF |
|
Max input voltage |
400 V (DC + AC Peak) |
|
DC gain accuracy |
1 mV |
±4% |
≥ 2 mV |
±3% |
|
Vertical sensitivity |
1 mV/div – 10 V/div |
|
Trigger type |
Edge, Video, Pulse, Slope, Runt, Windows, Timeout, Nth Edge, Logic, I2C, SPI, RS232, CAN (optional) |
|
Decoding Type (optional) |
RS232, I2C, SPI, CAN |
|
Trigger mode |
Auto, Normal, Single |
|
Line/field frequency (Video) |
Support standard NTSC, PAL and SECAM |
|
Automatic measurement |
Period, Frequency, Mean, PK-PK, RMS, Max, Min, Top, Base, Amplitude, Overshoot, Preshoot, Rise Time, Fall Time, +Pulse Width, -Pulse Width, +Duty Cycle, -Duty Cycle, Delay A→B |
|
Waveform math |
+, -, *, / ,FFT, FFTrms, Intg, Diff, Sqrt, User Defined Function, |
|
Waveform storage |
100 waveforms |
|
Communication interface |
Standard |
USB host, USB device, Trig Out (Pass/Fail), LAN |
Optional |
VGA |
|
Printer compatibility |
PictBridge |
|
Power supply |
100V – 240 VACRMS, 50/60 Hz, CAT Ⅱ |
|
Fuse |
2 A, T class, 250 V |
|
Battery (optional) |
3.7V, 13200mAh |
|
Touch screen (optional) |
Multi-touch capacitive touch screen |
|
* Max Sample rate (real time) for Dual CH should meet either following condition:
|
||
Waveform Generator (Dual channels AG is optional) |
||
Max frequency output |
25 MHz |
|
Sample rate |
125 MSa/s |
|
Channel |
1 or 2 |
|
Vertical resolution |
14 bits |
|
Amplitude range |
2 mVpp – 6 Vpp |
|
Waveform length |
8K |
|
Standard waveforms |
Sine, Square, Ramp, and Pulse |
|
Arbitrary waveforms |
Exponential Rise, Exponential Fall, Sin(x)/x, Step Wave, Noise, and others, total 46 built-in waveforms, and user-defined arbitrary waveform |
Multimeter (Optional) |
|
Full scale reading |
3¾ digits (Max 4000 count) |
Diode |
0 V – 1 V |
Input impedance |
10 MΩ |
On/off measurement |
<50(±30)Ω beeping |
Capacitance |
51.2nF – 100uF: ±(3%±3 digits) |
Voltage |
DCV: 400mV, 4V, 40V, 400V, 1000V: ±(1%±1digit) Max. input: DC 1000V ACV: 400mV, 4V, 40V, 400V: ±(1%±3digit) 750V: ±(1.5%±3digit) Frequency: 40Hz – 400Hz, Max. input: AC 750V (virtual value) |
Current |
DCA: 40mA, 400mA: ±(1.5%±1 digit) 4A, 10A: ±(3%±3digit) ACA: 40mA: ±(1.5%±3digit) 400mA: ±(2%±1digit) 4A, 10A: ±(3%±3digit) |
Impedance |
400Ω: ±(1%±3digit) 4KΩ~4MΩ: ±(1%±1digit) 40MΩ: ±(1.5%±3digit) |




Reviews
There are no reviews yet.